The Kati® Blitz Locating 2.0 is the successor of the established cable pulling and locating device Kati® Blitz 2in1. Equipped with an internal slip ring transformer and a high quality Polykat® fiberglass profile with integrated copper wires allows the installer to pull cable, to locate blockades and to follow the route of the pipe. Kati® Blitz Locating 2.0 can be used with all customary cable detectors. Similar to the Kati® Blitz Compact 2.0 the Kati® Blitz Locating 2.0 has an improved, ergonomic design and a user friendly handling. The handy crank of the 20 and 30 m version makes the winding of the Polykat® fibreglass profile very easy. The 50 m version has no crank. Furthermore the combination of both Flexi-Sonde 2.0 and Rod End 2.0 enables a very narrow bending radius of just 30 mm. The rod guide is reinforced with fibreglass that makes it extremely wear-resistant. The specific return stop protects the rod from gliding into the box accidentally while winding. The rod can be pulled out easily by hand. A service box with lots of accessories and the reliable high Katimex® quality accomplish the Kati® Blitz Locating 2.0 and make it an indispensable tool for electrical engineers. All existing accessories of the Kati® Blitz product range are compatible with the Kati® Blitz Locating 2.0. One device - two applications.

Accessories included:

• 5 pulling eyes Ø 6 mm, brass with M5 thread
• 1 cable grip with integral swivel for Ø 6-9 mm cables
• 2 rod ends 2.0 with external M5 thread
• 3 splices, brass
• 1 special adhesive (3g)
• 1 flexi-sonde 2.0 Ø 7 mm
• 1 flexi-sonde 2.0 Ø 10 mm

The accessories are compatible with all products of the Kati® Blitz- and Cabelmax range as well as with the Push Rods Profi-Set.

Productinformation:

• Rod-Ø: 3 mm
• Minimum bending radius: 30 mm
• Breaking strain of rod: 5 kN
• Weight: 1.1 kg
• Length: 20 m
• Tested strength of the connection rod/sleeve: 1 kN